UBUNTU LSUSB INSTALL
UBUNTU LSUSB DRIVER

If the device is not detected by the lsusb command, check the following: Take a look at the get started guide for the IntelВ® Neural Compute Stick 2.

UBUNTU LSUSB INSTALL

The IntelВ® NCS 2 is not supported by the IntelВ® Movidiusв„ў Neural Compute SDK, you will need to download and install the IntelВ® Distribution of OpenVINOв„ў toolkit. The unbind is writable only by root user.If the device is detected and the device ID is 03e7:2485 you are using the IntelВ® Neural Compute Stick 2 (IntelВ® NCS 2). Note that just issuing sudo echo 2-2.2:1.0 > unbind doesnвЂ™t work because that only elevates permission for the echo command and not for the redirection. You can unbind like so: sudo sh -c 'echo 2-2.2:1.0 > unbind'Дў-2.1:1.0 bind module new_id remove_id uevent unbindДЄnd the device will no longer show up in the interface list: ip link show Link/ether 00:0e:c6:cd:8d:75 brd ff:ff:ff:ff:ff:ffД§: enx000ec6cd8d90: mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000

If you plug in another dongle of same type, you can now see two devices: lsДў-2.1:1.0 2-2.2:1.0 bind module new_id remove_id uevent unbindДЄt this point you can see two net devices: ip link showД¦: enx000ec6cd8d75: mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000

UBUNTU LSUSB DRIVER

You can see the driver instance created in sysfs and within the driver, an instance of the USB bus address of the Ethernet Dongle: lsДЄx88179_178a btusb hub r8188eu usb usbfs usbhid lsДў-2.2:1.0 bind module new_id remove_id uevent unbind AX88179 Gigabit EthernetД«us 002 Device 002: ID 0424:5744 Standard Microsystems Corp.Д«us 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hubД«us 001 Device 007: ID 138a:0011 Validity Sensors, Inc. Here is an example where I was trying to do the same thing on Ubuntu 16.04 for USB-Ethernet device: lsusbД«us 002 Device 003: ID 0b95:1790 ASIX Electronics Corp. echo -n '1-3' > /sys/bus/usb/drivers/usb/unbind |_ Port 3: Dev 17, If 0, Class=vend., Driver=rt73usb, lsusbД«us 001 Device 002: ID 0424:9512 Standard Microsystems Corp.Д«us 001 Device 017: ID 148f:2573 Ralink Technology, Corp. : Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M RT2501/RT2573 Wireless AdapterД«DeviceClass 0 (Defined at Interface level)ДЇinally I found the right bus ID of the usb device. Here is the detailed info about the wireless devide: ( lsusb -v | grep -E '/dev/null) Bus 001 Device 004: ID 148f:2573 Ralink Technology, Corp. |_ Port 1: Dev 3, If 0, Class=vend., Driver=smsc95xx, 480M |_ Port 1: Dev 2, If 0, Class=hub, Driver=hub/3p, 480M RT2501/RT2573 Wireless AdapterДЄnd lsusb -t: /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M lsusb prints out the following: Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.Д«us 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubД«us 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.Д«us 001 Device 004: ID 148f:2573 Ralink Technology, Corp. So to able to do that, I need the bus ID. I would like to bind/unbind my usb device - a wireless adapter.

Ubuntu lsusb